Zum Hauptinhalt springen Zur Suche springen Zur Hauptnavigation springen
B2B-Fachhandel für Elektroprofis

DOTLUX LED-Fluter LENSone max. 100W 120° Abstrahlwinkel POWERselect COLORselect Sensor

Produktinformationen DOTLUX LED-Fluter LENSone max. 100W 120° Abstrahlwinkel POWERselect COLORselect Sensor

LENSone - Einer für Alles durch eine Vielzahl an Funktionen & Einstellungsmöglichkeiten Integrierter Sensor mit drei Einstellungsmöglichkeiten (25lx AN - 75lx AUS // 200lx AN - 600lx AUS // deaktiviert) POWERselect (100W - 75W - 50W) COLORselect (3000K - 4000K - 5000K) erweitern die Anwendungsmöglichkeiten Einfachste Installation durch FASTconnect Anschluss Gebogener Montagebügel ermöglicht einfachste Montage ohne den Bügel demontieren zu müssen (frei drehbar 320°) In drei aufeinander abgestimmten Abstrahlcharakteristiken erhältlich (120°, 80x120° , 60°) Langlebige Industrienetzteile mit 10kV Überspannungsschutz 3000K (Warmweiß) - 100 % / 100W: 138 lm/W &rarr, 13.854 lm - 75 % / 75W: 144 lm/W &rarr, 10.805 lm - 50 % / 50W: 152 lm/W &rarr, 7.601 lm 4000K (Neutralweiß) - 100 % / 100W: 163 lm/W &rarr, 15.539 lm - 75 % / 75W: 171 lm/W &rarr, 12.850 lm - 50 % / 50W: 181 lm/W &rarr, 9.062 lm 5000K (Kaltweiß) - 100 % / 100W: 146 lm/W &rarr, 14.490 lm - 75 % / 75W: 155 lm/W &rarr, 11.591 lm - 50 % / 50W: 164 lm/W &rarr, 8.193 lm
Technische Eigenschaften – Teil 1 von 2
Adjustability: Swivelling
Beam angle: > 80° - Extreme wide beam
Beam angle adjustable: No
Colour consistency (McAdam ellipse): SDCM5
Colour of light: White
Colour of light adjustable: Positions
Colour rendering index CRI: 80-89
Colour temperature: 3000–5000 K
Compatible with Amazon Alexa: No
Compatible with Apple HomeKit: No
Compatible with Google Assistant: No
Connectable conductor cross section: 1–1 mm2
Connection type: Other
Constant light output (CLO): No
Covering of the luminaire with thermally insulating material possible: No
Cover material: Glass, transparent
Degree of protection (IP): IP66
Degree of protection (NEMA): Other
Dimming 0-10 V: No
Dimming 1-10 V: No
Dimming DALI: No
Dimming DALI-2: No
Dimming DMX: No
Dimming DSI: No
Dimming LineSwitch: No
Dimming RF: No
Dimming Sine Wave Reduction: No
Dimming Touch and Dim: No
Dimming Zigbee: No
Dimming mains voltage modulation: No
Dimming manufacturer's proprietary system: No
Dimming phase cut-off (trailing edge): No
Dimming phase cut-on (leading edge): No
Dimming potentiometer (integrated): No
Dimming programmable: No
Dimming with push-button: No
Emergency power supply integrated: No
Energy efficiency class of the light source according to EU regulation 2019/2015: Not required
Exchangeable control gear: No
Height/depth: 57 mm
Housing colour: Black
Housing material: Aluminium
IFTTT support available: No
Impact strength: IK08
Lamp type: LED not exchangeable
Length: 355 mm
Technische Eigenschaften – Teil 2 von 2
Light distribution: Symmetric
Light distributor: Focal lens
Light outlet: Direct
Luminaire efficacy: 163 lm/W
Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24: Yes
Luminous flux: 15539–15539 lm
Luminous flux adjustable: No
Luminous intensity: 16915 cd
Max. number of luminaires per miniature circuit breaker B16 (MCB): 3
Max. number of luminaires per miniature circuit breaker C16 (MCB): 5
Max. system power: 100 W
No dim function: Yes
Nominal current: 1294–1294 mA
Nominal voltage: 230–230 V
Number of poles: 3
Operation by Bluetooth: No
Power factor: 0.98
Protection class according to IEC 61140: I
Rated ambient temperature according to IEC 62722-2-1: -30–50 °C
Rated lifetime L70/B50 at 25 °C: 100000 h
Rated luminous flux according to IEC 62722-2-1: 15539 lm
Reflector: None
Reflector colour: Other
Suitable for built-in mounting: No
Suitable for ceiling mounting: Yes
Suitable for clamp-mounting: Yes
Suitable for lamp power: 100–100 W
Suitable for light-track mounting: No
Suitable for low voltage cable system: No
Suitable for number of light sources: 760
Suitable for pedestal/floor mounting: Yes
Suitable for surface mounting: Yes
Suitable for suspended mounting: No
Suitable for traverse mounting: Yes
Suitable for wall mounting: Yes
Suitable for workplace according to EN 12464-1: No
Surface brushed: No
Surface protection: Powder coating
Type of control gear: LED operating device current-controlled
Type of wiring: Ending
Voltage type: AC/DC
Width: 346 mm
With control gear: Yes
With light sensor: Yes
With light source: Yes
With movement sensor: No

0 von 0 Bewertungen

Durchschnittliche Bewertung von 0 von 5 Sternen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.


Produktgalerie überspringen

Zubehör

DOTLUX Mastadapter 60mm für LENSone 100-300W
DOTLUX Mastadapter 60mm für LENSone 100-300W
Artikel-Nr. 6-DOTLUX-4910 Hersteller-Nr. 4910

Mastadapter für eine sichere Montage des Fluters LENSplus Max. Belastbarkeit: 33,2 Kg

Regulärer Preis: 56,90 €
Bestellbar – Lieferzeit beachten
DOTLUX Mastadapter 76mm für LENSone 50-300W
DOTLUX Mastadapter 76mm für LENSone 50-300W
Artikel-Nr. 6-DOTLUX-4911 Hersteller-Nr. 4911

Mastadapter für eine sichere Montage des Fluters LENSplus Max. Belastbarkeit: 33,2 Kg

Regulärer Preis: 94,90 €
Bestellbar – Lieferzeit beachten
DOTLUX Klemmhalterung 40-100mm für LENSone 100W
DOTLUX Klemmhalterung 40-100mm für LENSone 100W
Artikel-Nr. 6-DOTLUX-4912 Hersteller-Nr. 4912

Klemmhalterung für Masten mit einem Durchmesser von 40-100 mm für eine sichere Montage des Fluters LENSplus von 50 W bis 150 W

Regulärer Preis: 36,90 €
Bestellbar – Lieferzeit beachten
DOTLUX Klemmhalterung 40-150mm für LENSone 100-300W
DOTLUX Klemmhalterung 40-150mm für LENSone 100-300W
Artikel-Nr. 6-DOTLUX-4913 Hersteller-Nr. 4913

Klemmhalterung für Masten mit einem Durchmesser von 40-150 mm für eine sichere Montage des Fluters LENSplus von 200 W bis 300 W

Regulärer Preis: 48,90 €
Bestellbar – Lieferzeit beachten