DOTLUX LED-Hallentiefstrahler LIGHTBEAM 240W 4000K 85°
Produktinformationen DOTLUX LED-Hallentiefstrahler LIGHTBEAM 240W 4000K 85°
| Adjustability: | Not adjustable |
|---|---|
| Beam angle: | > 80° - Extreme wide beam |
| Beam angle adjustable: | No |
| Colour consistency (McAdam ellipse): | SDCM5 |
| Colour of light: | White |
| Colour of light adjustable: | No |
| Colour rendering index CRI: | 80-89 |
| Colour temperature: | 4000–4000 K |
| Compatible with Amazon Alexa: | No |
| Compatible with Apple HomeKit: | No |
| Compatible with Google Assistant: | No |
| Conductor cross section: | 1 mm2 |
| Connectable conductor cross section: | 1–1 mm2 |
| Connection type: | Crimping |
| Constant light output (CLO): | No |
| Covering of the luminaire with thermally insulating material possible: | No |
| Cover material: | Plastic, opal |
| Degree of protection (IP): | IP66 |
| Degree of protection (NEMA): | Other |
| Dimming 0-10 V: | Yes |
| Dimming 1-10 V: | Yes |
| Dimming DALI: | No |
| Dimming DALI-2: | No |
| Dimming DMX: | No |
| Dimming DSI: | No |
| Dimming LineSwitch: | No |
| Dimming RF: | No |
| Dimming Sine Wave Reduction: | No |
| Dimming Touch and Dim: | No |
| Dimming Zigbee: | No |
| Dimming mains voltage modulation: | No |
| Dimming manufacturer's proprietary system: | No |
| Dimming phase cut-off (trailing edge): | No |
| Dimming phase cut-on (leading edge): | No |
| Dimming potentiometer (integrated): | No |
| Dimming programmable: | No |
| Dimming with push-button: | No |
| Emergency power supply integrated: | No |
| Energy efficiency class of the light source according to EU regulation 2019/2015: | Not required |
| Exchangeable control gear: | No |
| Failure rate at median useful life of 35,000 h at 25 °C ambient (tq): | 5 % |
| Failure rate at median useful life of 50,000 h at 25 °C ambient (tq): | 7 % |
| Failure rate at median useful life of 100,000 h at 25 °C ambient (tq): | 10 % |
| Glow-wire test according to IEC 60695-2-11: | 750 °C - 30 s |
| Height/depth: | 65 mm |
| Housing colour: | White |
| Housing material: | Aluminium |
| IFTTT support available: | No |
| Impact strength: | IK10 |
| Lamp type: | LED exchangeable |
|---|---|
| Length: | 680 mm |
| Light distribution: | Symmetric |
| Light distributor: | Diffuser lens/optic/panel |
| Light outlet: | Direct |
| Lumen maintenance at median useful life of 35,000 h at 25 °C ambient (tq): | 79 % |
| Lumen maintenance at median useful life of 50,000 h at 25 °C ambient (tq): | 92 % |
| Lumen maintenance at median useful life of 100,000 h at 25 °C ambient (tq): | 89 % |
| Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24: | Yes |
| Luminous flux: | 42681–42681 lm |
| Luminous flux adjustable: | No |
| Luminous intensity: | 27577 cd |
| Max. number of luminaires per miniature circuit breaker B16 (MCB): | 12 |
| Max. number of luminaires per miniature circuit breaker C16 (MCB): | 18 |
| Max. system power: | 240 W |
| No dim function: | No |
| Nominal current: | 750–750 mA |
| Nominal voltage: | 230–230 V |
| Number of poles: | 3 |
| Power factor: | 0.95 |
| Protection class according to IEC 61140: | I |
| Rated ambient temperature according to IEC 62722-2-1: | -30–50 °C |
| Rated lifetime L70/B50 at 25 °C: | 150000 h |
| Rated luminous flux according to IEC 62722-2-1: | 26288 lm |
| Suitable for built-in mounting: | No |
| Suitable for ceiling mounting: | Yes |
| Suitable for clamp-mounting: | No |
| Suitable for light-track mounting: | No |
| Suitable for low voltage cable system: | Yes |
| Suitable for number of light sources: | 960 |
| Suitable for pedestal/floor mounting: | No |
| Suitable for surface mounting: | Yes |
| Suitable for suspended mounting: | Yes |
| Suitable for traverse mounting: | No |
| Suitable for wall mounting: | Yes |
| Suitable for workplace according to EN 12464-1: | No |
| Surface brushed: | No |
| Surface protection: | Powder coating |
| Total harmonic distortion: | 10 |
| Type of control gear: | LED operating device current-controlled |
| Type of wiring: | Ending |
| Unified Glare Ratio (UGR): | 19 |
| Voltage type: | AC/DC |
| Width: | 350 mm |
| With control gear: | Yes |
| With light sensor: | No |
| With light source: | Yes |
| With movement sensor: | No |
Anmelden
Zubehör
Durch das anschließen einer 1-10V dimmbaren LED-Leuchte, kann diese sowohl im Normal, als auuch im Notbetrieb verwendet werden. Bei einem Stromausfall schaltet das Gerät automatisch in den Notbetrieb und dimmt die angeschlossene Leuchte mit der 1-10V Schnittstelle auf 10% Leistung Die Notstromleistung hängt von der Leistung der angeschlossenen Leuchte ab. Im Regelfall 10% der ursprünglichen Leuchtenleistung Je geringer die Leistung der Leuchte desto geringer die Notstromleistung. Je niedriger die Leistung der Leuchte, desto länger die Notstrombetriebszeit. Begrenzt auf 200W - Kann nur mit Leuchten bis MAX.200W betrieben werden. Beispiel Notstromleistung: Bei einer 100W Leuchte ist die Leistung im Notstrombetrieb ca. 10W und hält ca. 180min. Bei 200W entsprechend 20W und ca 90min.
Steuerungseinheit für DOTLUX Emergency DC Kit 5364
Optionales Zubehör: DOTLUX PIR Sensor mit Daylight Harvesting Funktion passend für LIGHTBEAM und LIGHTSHOWERsmart+
schwenkbare (60° nach links, 60° nach rechts), ballwurfsichere Halterung für DOTLUX LED-Hallenstieftrahler LIGHTBEAM
ballwurfsichere Halterung für DOTLUX LED-Hallenstieftrahler LIGHTBEAM, für Schneider Canalis-System
Profile für den Deckeneinbau des DOTLUX-Hallentiefstrahlers LIGHTBEAM
ballwurfsicheres Abhängeset für den DOTLUX LED-Hallenstieftrahler LIGHTBEAM 4 Karabiner verschraubbar 2 Ketten 50cm 2 Ketten mit Karabiner 110cm
Optionales Zubehör: Radar Sensor mit Daylight Harvesting Funktion passend für LIGHTBEAM und LIGHTSHOWERsmart+